316L STAINLESS STEEL PIPE SYSTEMS
TUBEPRESS®
(Series 9000)
                  EPDM
Colour: black
Max. continuous temp.: -30°C to 120°C
(short term peaks up to 150°C)
WaterMark 23057
Requirement according to KTW fulfilled
TUBEPRESS® GAS
(Series 17000)
PN 5
GT/PN 5
HNBR
Colour: yellow
Max. continuous temp.: -20°C to 70°C
Gas certification 3005
Requirement according to DVGW VP 614 fulfilled
TUBEPRESS® INDUSTRY
(Series 18000)
HT FKM (Viton)
Colour: red
Max. continuous temp.: -20°C to 200°C
Solar thermal energy to 200°C
(short term peaks up to 280°C)
Resistant against oils and water-glycol mixtures
TUBEPRESS® SILICONE FREE
(Series 19000)
 SF FKM (Viton) Silicone Free
Colour: green
Max. continuous temp.: -20°C to 200°C
Resistant against oils and water-glycol mixtures
STANDARDS
Materials: Material no: 1.4404 / AISI 316L according to EN 10088
Formed components: Material no: 1.4404 / AISI 316L according to EN 10283
Stainless steel precision casting parts: Material no: 1.4404 / AISI 316L according to EN 10088
Tubes: Tube dimensions according to EN 10312 and DVGW-GW 541 blank and solution annealed, Firmness limited upward
Tubing internal surface: According to EN 13012, free of harmful components and according to the special requirements of the DVGW working paper GW 541

 

TUBEPRESS® system is listed and complies with the requirements of Water Mark certificate number 23057 and has Gas Approval certificate number 3005. It has been approved for use in most countries and has many other statutory approvals including Lloyds Register